Description

A fast acting water and moisture displacer fluid that quickly dries out machines and electrical equipment.

It is rust preventive and protects the surfaces from rust and corrosion.

It allows quick starting of wet ignition systems and electric motors and equipment without disassembly or removal.

It eliminates moisture from the electrical systems of various machines.

Penetrates existing rust and forms a film to prevent further corrosion.

Cleans and lubricates the surfaces it is applied.

Advantages

• Forms a corrosion resistant and salt water resistant protective film.
• Stops grinding by penetrating deep and lubricating, hinges, locks, mechanisms, threads, etc.
• After its application surfaces remain lubricated.
• Keeps moisture away.
• Protects spare-parts from rust and leaves a thin imperceptible protective film.

Intended Usage               

WATER DISPLACER is used:

For extended indoor protection of interior or exterior surfaces of machinery, instruments, bearings or materials with or without use of supplementary barrier materials.

For outdoor protection of material for limited periods where metal temperatures do not reach levels that produce prohibitive flow of the corrosion preventive film.

Also WATER DISPLACER could be used for:

• Wet ignition systems on cars, trucks, ships, etc.
• Wet electric motors and starters in power plants, factories, shipboard, etc.
• Cutting tools, hand tools, micrometers and measurement instruments.
• Seagoing equipment and Outboard engines.
• Pumps and valves.
• Aviation equipment.
• Cleaning compound for bore of small arms and automatic aircraft weapons.

Directions for Use

It is used in full strength by spray, immersion or swab.  Allow WATER  DISPLACER to dry to form a protective anti-corrosive film.

Product removal

It is easily removed from parts by solvent wiping, steam gun cleaning or alkaline hot tank immersion.