Description

OIL-REMOVER is a concentrated, heavy duty, water dilutable cleaner with surfactants for fast effective cleaning. Does not contain chlorinated solvents.

Applications

OIL-REMOVER is ideal for removing dirt, mineral oils, grease, wax, light carbon, smoke stains etc., from machinery parts, diesel engine exteriors, compressor exteriors, tank tops, bulkheads, decks, bunker tanks etc. Also it is suitable for engine room decks and spot cleaning/degreasing of oil tanks.

Advantages

OIL-REMOVER is safe for all metals, glass, plastic, wood and painted surfaces. Loosens and breaks up deposits, and leaves surfaces oil and grease free. OIL-REMOVER can be used as an all purpose degreaser.

Usage

OIL-REMOVER may be used neat or diluted with petroleum or water in varying concentrations depending on the heaviness of the soil by soaking, spraying, scrubbing or butterworth and steam cleaning machines.

• For heavy duty cleaning: Used as is, or diluted 1 part concentrate up to 5 parts of water.
• For normal cleaning: Used as is, or diluted 1 part concentrate up to 10 parts of water.
• For light cleaning: Used as is, or diluted 1 part concentrate up to 20 parts of water.

Soaking: Parts are immersed in OIL-REMOVER. Allow deposit to be broken up and loosened before removal then rinse off with water.

Spraying: Apply OIL-REMOVER over all soiled areas. Allow time for OIL-REMOVER to act, between 15-30 minutes, then rinse off by water hose.

Scrubbing: Use OIL-REMOVER as is and agitate by scrubbing where soiling is stubborn. Rinse off with water.

Butterworth or steam cleaning machines: Use concentration of 0,1 – 1% at the nozzle.

Description

OIL-REMOVER-SUPER is a solvent emulsion cleaner with surfactants for fast effective cleaning. Does not contain chlorinated solvents.

Applications

OIL-REMOVER-SUPER is ideal for removing mineral oils and greases from machinery parts, diesel engine exteriors, compressors exteriors, tank tops, bulkheads, decks, bunker tanks etc. Also is suitable for engine rooms decks and spot cleaning/degreasing of oil tanks.

Advantages

OIL-REMOVER-SUPER is safe for all metals, glass, plastic, wood and painted surfaces. Loosens and breaks up deposits, leaves oil and grease free surfaces, has a strong emulsifying action and it is easy to use. OIL-REMOVER-SUPER can be used as an all purpose degreaser.

Usage

OIL-REMOVER-SUPER may be used neat or diluted with petroleum or water in varying concentrations depending on the heaviness of the soil by soaking, spraying or combined with scrubbing.

Soaking: Parts are immersed in OIL-REMOVER-SUPER. Allow deposit to be broken up and loosened before removal. Then rinse off with water.

Spraying: Apply OIL-REMOVER-SUPER over all soiled areas. Allow time for OIL-REMOVER-SUPER to act, between 15-30 minutes, then rinse off by water hose.

Scrubbing: Use OIL-REMOVER-SUPER neat and agitate by scrubbing where soiling is stubborn. Rinse off with water.

Butterworth or steam cleaning machines:  Use concentration of 0,1 – 1% at the nozzle.

Specification

Appearance        : Colorless liquid

Specific gravity   : 0,78 + 0,01

Corrosive action : Metal, none

                             Paint, none

                             Rubber, slight swelling.

OIL-REMOVER-SUPER is approved by The Greek Chemical State Laboratory with approval No. 13632/0/2009.

Description

TANK WASH is a liquid compound containing petroleum solvents, emulsifying detergents and surface active agents, for cleaning tanks of double bottom at sea.

Application

TANK WASH is formulated for cleaning and gas-freeing double bottom, deep tanks and other fuel oil bunker tanks at sea, degreasing and cleaning engine cooling water systems, and removing oil and greases from soiled surfaces.

Advantages

TANK WASH has a high solvent power, penetrates rapidly, makes an emulsion in fresh or sea water, is an effective and economical product, does not produce corrosion on metal surfaces, is low toxic and has a high cleaning action provided by ship's motion.

Usage

Cleaning and gas freeing of double bottom and deep tanks.

• Drain off all existing fuel and rinse with plenty of sea water. Drain off all residues.
• Ensure that all valves to and from the tank are closed.
• Add 1,5 to 3 liters of TANK WASH for 1000 liters of water, and fill tank up to 75% of the volume tank with sea water.
• Apply heating to 60 0C and maintain for 48 to 96 hours.
• Discharge and strip tank. Rinse tank with sea water.
• A second dose of 1 to 1,5 liters of TANK WASH following the same procedure will give excellent results

Cleaning of cargo tanks by injecting machine.

TANK WASH can be used for removing oil and greases from the soiled surfaces of cargo tanks by means of an injecting machine dilute with sea water.

General cleaning methods.

TANK WASH can be used as a common degreaser neat or diluted with petroleum or water in varying concentrations depending on the heaviness of the soil by soaking, spraying or combined with scrubbing. Allow time for TANK WASH to act, between 15-30 minutes, then rinse off by water hose.

Description

TANK WASH - S is a liquid compound containing petroleum solvents, emulsifying detergents and surface active agents, for cleaning tanks of double bottom at sea.

Application

TANK WASH - S is formulated for cleaning and gas-freeing double bottom, deep tanks and other fuel oil bunker tanks at sea, degreasing and cleaning engine cooling water systems, and removing oil and greases from soiled surfaces.

Advantages

TANK WASH - S has a high solvent power, penetrates rapidly, makes an emulsion in fresh or sea water, is an effective and economical product, does not produce corrosion on metal surfaces, is low toxic and has a high cleaning action provided by ship's motion.

Usage

Cleaning and gas freeing of double bottom and deep tanks.

• Drain off all existing fuel and rinse with plenty of sea water. Drain off all residues.
• Ensure that all valves to and from the tank are closed.
• Add 1,5 to 3 liters of TANK WASH - S for 1000 liters of water, and fill tank up to 75% of the volume tank with sea water.
• Apply heating to 60 ⁰C and maintain for 48 to 96 hours.
• Discharge and strip tank. Rinse tank with sea water.
• A second dose of 1 to 1,5 liters of TANK WASH - S following the same procedure will give excellent results

Cleaning of cargo tanks by injecting machine.

TANK WASH - S can be used for removing oil and greases from the soiled surfaces of cargo tanks by means of an injecting machine dilute with sea water.

General cleaning methods.

TANK WASH - S can be used as a common degreaser neat or diluted with petroleum or water in varying concentrations depending on the heaviness of the soil by soaking, spraying or combined with scrubbing. Allow time for TANK WASH - S  to act, between 15-30 minutes, then rinse off by water hose.

Description

Description

COAL & TAR REMOVER is a solvent emulsion cleaner with surfactants for fast effective cleaning.

Applications

COAL & TAR REMOVER is ideal for removing asphalt, tar, mineral oils and greases from machinery parts, diesel engine exteriors, compressors exteriors, tank tops, bulkheads, decks, bunker tanks etc. Also is suitable for engine rooms, decks and spot cleaning/degreasing of oil tanks.

Advantages

COAL & TAR REMOVER is safe for all metals, glass, plastic, wood and painted surfaces.  Loosens and breaks up deposits, has a strong emulsifying action and it is easy to use. COAL & TAR REMOVER can be used as an all-purpose degreaser.

Usage

COAL & TAR REMOVER may be used neat or diluted with solvents or water in varying concentrations depending on the heaviness of the soil by soaking, spraying or combined with scrubbing.

Soaking: Parts are immersed in COAL & TAR REMOVER. Allow deposit to be broken up and loosened before removal. Then rinse off with water.

Spraying: Apply COAL & TAR REMOVER over all soiled areas. Allow time for COAL & TAR REMOVER to act, between 15-30 minutes, then rinse off by water hose.

Recirculation: Apply COAL & TAR REMOVER in proportion 8-10%. For better results heat the solution.

Scrubbing: Use COAL & TAR REMOVER neat and agitate by scrubbing where soiling is stubborn. Rinse off with water.

Butterworth or steam cleaning machines:  Use concentration of 0,1 – 1% at the nozzle.

Description

SEPARATOR CLEANER is an acidic liquid product containing surfactants, emulsifying agents, inhibitors and solvents.

Application

SEPARATOR CLEANER is suitable for removing all heavy tenacious deposits which collect in fuel and lube oil centrifugal stainless steel separators (DE LAVAL) and filters.

Adcantages

SEPARATOR CLEANER permits in situ-cleaning avoiding dismantling of unit, leaves no film or residue, cleans down to metal surfaces and improve efficiency of centrifuge installation.

Usage

SEPARATOR CLEANER can be used by recirculation when the cleaning of separators discs or filters is done in - situ and by immersion or spray when the cleaning is done on individual discs or filters.

SEPARATOR CLEANER may be used neat or diluted down to 20% by volume with fresh water. Depending on the amount of contamination the cleaning operation will vary from 30 minutes to 4 hours. After cleaning rinse thoroughly with fresh water.

Description

LECTROKLEEN-7 is a liquid product used for the cleaning and degreasing of electrical equipment such as generators, motors, distribution boards, windings, dynamos, starters and dismantled machine parts with the following advantages:

1. Low toxicity and has no unpleasant odor.
2. Safe to colors and generally all metals.
3. Great cleaning capability.
4. Does not require rinsing.
5. Provides temporary anti-corrosion protection.

Application

LECTROKLEEN-7 is used in recirculating machines (pump - brush) to remove dust, oil, grease, etc.

The material has a long service life and is therefore very economical.

It can also be used by hand with brush or spray.

The objects are allowed to dry. No rinsing required.

Approval

LECTROKLEEN – 7 is approved according to the Greek Legislation by the State General Chemical Laboratory with approval No.13729/0/2009.

Description

Heavy duty water based alkaline cleaner, containing specially selected sequestrants, powerful synthetic detergents, alkaline salts and soaps. Not suitable for aluminum, zinc, tin, zinc silicate coatings and painted surfaces.

In this case use our product ARR-SAFETY LIQUID.

Applications

ARR-LIQUID is efficient in cleaning heavy duty cargo tanks as well as refrigerated holds, containers and cargo holds, discharging them of drying, semi- drying and non-drying natural oils and fats. It is also used in removing a wide range of petrochemicals, alcohols, light hydrocarbons, carbon deposits, mineral oils, residual combustion products, grease etc.

2). ARR-LIQUID is used in dairies for the removal of butter from pumps and piping with excellent results.

Directions for Use

• With immersion, spray or brush.

ARR-LIQUID is applied by immersion, spray or mop. May be used neat or diluted with water in a proportion of 5% depending on the amount of soils.

Allow the solution to remain on the surface for a few minutes and rinse with water under pressure.

ARR-LIQUID can be used cold or hot. For better results heat the solution up to 60 - 70oC.

• With recirculation and heating.

By using a secondary tank, heat a solution of 5-20% ARR-LIQUID at 80-90 0C with the heating coils and clean the surfaces, by using a pump and recirculate the material for 2 to 6 hours, then flush with water.

Features

ARR-LIQUID is non flammable and non-corrosive to ferrous metals.

Furthermore, it prevents redeposition in the cleaned areas.