Heavy duty water based alkaline cleaner, containing specially selected sequestrants, powerful synthetic detergents, alkaline salts and soaps.
Code : P00152 | | (SDS)
Heavy duty water based alkaline cleaner, containing specially selected sequestrants, powerful synthetic detergents, alkaline salts and soaps. Not suitable for aluminum, zinc, tin, zinc silicate coatings and painted surfaces.
In this case use our product ARR-SAFETY LIQUID.
ARR-LIQUID is efficient in cleaning heavy duty cargo tanks as well as refrigerated holds, containers and cargo holds, discharging them of drying, semi- drying and non-drying natural oils and fats. It is also used in removing a wide range of petrochemicals, alcohols, light hydrocarbons, carbon deposits, mineral oils, residual combustion products, grease etc.
*ARR-LIQUID is used in dairies for the removal of butter from pumps and piping with excellent results.
Directions for Use
- With immersion, spray or brush.
ARR-LIQUID is applied by immersion, spray or mop. May be used neat or diluted with water in a proportion of 5% depending on the amount of soils.
Allow the solution to remain on the surface for a few minutes and rinse with water under pressure.
ARR-LIQUID can be used cold or hot. For better results heat the solution up to 60 - 70oC.
- With recirculation and heating.
By using a secondary tank, heat a solution of 5-20% ARR-LIQUID at 80-90 0C with the heating coils and clean the surfaces, by using a pump and recirculate the material for 2 to 6 hours, then flush with water.
ARR-LIQUID is non flammable and non-corrosive to ferrous metals.
Furthermore, it prevents redeposition in the cleaned areas.