S – 2055 is a strong aircraft paint stripper tank – type in liquid form with two – layers which meets the requirements of MIL – R – 83936 A Type I, class II and Type II, class II and BOEING DOCUMENTS D6 – 17 487.
S- 2055 is applied mainly for removing paint coatings from the landing gear wheels of aircraft. It is excellent for the removal of the most types of paint coatings such as polyurethane, epoxies, nitrocelluloses etc. S – 2055 except paint, removes also carbon deposit oils, greases etc.
S- 2055 is used only cold and by immersion. The parts to be stripped must be totally immersed in the lower layer. Most paint schemes will be removed fairly readily but the very resistant types may require several hours soaking. After soaking parts must be rinsed with water under pressure.
Appearance: Liquid with two – layers
pH (low layer): > 10
Compatibility: Doesn’t corrode metals.
May swell rubbers.
Mild steel or stainless steel are recommended for tank construction. The upper layer is an aqueous solution containing anti – corrosion agents, special additives etc. The aqueous solution of upper layer prevents the evaporation of the lower layer which is the drastic one. Add water in order to minimize the drag – out loss of the upper layer.
K-2025 is a very effective, thickened paint stripper, which meets the requirements of MIL-R-81294D Type I, Class 1 and BOEING Document D6-17847.
K-2025 is especially designed for removing epoxy and polyurethane paints as well as other difficult to remove organic coatings from the metal surfaces of the aircrafts. It is safe for all type of metals.
Safe to all metals.
Very effective, normally removes more than one coating of paint. Non-flammable.
Easily rinsed with cold water.
Can be applied by brush or non-atomizing spray methods. Used as received. No mixing or dilution required.
Used at room temperature.
K-2025 can be applied as received by brush or spray. Because it is thick it is ideal for vertical surfaces.
Allow K-2025 sufficient dwell time for thorough loosening or blistering of the paint. When paint is loose, thoroughly agitate all areas with a stiff bristle brush. The complete removal of the paint residues is accomplished with high pressure, high volume, cold water or with a steam cleaning machine.
Normally a coat of K-2025 is sufficient to remove more than one coating of paint.
Where multicoat systems have to be removed, it may be necessary to use more than one application of K-2025.