Cutting Oils - eurochemgr.com

LUBRICOOL No. 37

(Cutting oil) Synthetic coolant for machining and cutting operations.
Code : P00518 | | (SDS)

Full synthetic machining lubricant which contains lubricant additives, rust inhibitors and bacteriostats to assure effective cutting tool lubrication and prolonged service life.

Purpose:

LUBRICOOL N^o 37 is an full synthetic coolant used for machining and cutting operations. When mixed with water it remains clear and provides effective lubrication and rust protection.

Advantages:

LUBRICOOL N^o 37 provides the following product features:

Water dilution provides maximum cooling efficiency
Contains extra pressure additives
Inhibited to provide effective rust protection
Long in service life maintained by effective bacteriostats
Biodegradable to permit safe and inexpensive disposal

Application:

Concentrations of LUBRICOOL N^o 37 will vary depending on the hardness of the metal, severity of the cut, machine speed and type of cutting tool. A general guide for use of LUBRICOOL N^o 37 is:

OPERATION	CONCENTRATION IN WATER
Grinding	3 – 7 %
Turning
Drilling
Milling
Gear Cutting	5 – 10 %
Tapping
Broaching
Reaming

NOTE: When used on aluminum the concentration should be increased.

LUBRICOOL No. 18

(Cutting oil) Emulsifiable oil based coolant for machining and cutting operations.
Code : P01533 | | (SDS)

Description

Emulsifiable oil machining lubricant which contains lubricant additives, rust inhibitors, emulsion stabilizer and bacteriostats to assure effective cutting tool lubrication and prolonged service life.

Purpose:

LUBRICOOL N^o 18 is an Emulsifiable Oil base coolant used for machining and cutting operations. When mixed with water it forms a milky oil in water emulsion that provides effective lubrication and rust protection.

Advantages:

LUBRICOOL N^o 18 provides the following product features:

Oil base assures optimum lubrication
Water dilution provides maximum cooling efficiency
Inhibited to provide effective rust protection
Long in service life maintained by effective bacteriostats
Non-odorous due to careful selecting of petroleum derivatives
Biodegradable to permit safe and inexpensive disposal

Application:

OPERATION	CONCENTRATION IN WATER
Grinding	3 – 7 %
Turning
Drilling
Milling
Gear Cutting	5 – 10 %
Tapping
Broaching
Reaming

Concentrations of LUBRICOOL N^o 18 will vary depending on the hardness of the metal, severity of the cut, machine speed and type of cutting tool. A general guide for use of LUBRICOOL N^o 18 is:

NOTE: When used on aluminum the concentration should be increased.