LECTROKLEEN - D4 - FAST is a non - flammable quick drying solvent, containing chlorinated hydrocarbons. LECTROKLEEN - D4 - FAST has been specifically formulated to replace 1,1,1 Trichloroethane for all cleaning operations even for VAPOR DEGREASING.
LECTROKLEEN - D4 - FAST is applied for cleaning and degreasing of electrical equipment such as motors, generators, switchgears, coils, etc. and as a general use cleaner for machine parts, equipment, motors, engines, etc. without the need for rinsing.
LECTROKLEEN - D4 - FAST is alternatively used for vapor degreasing with excellent results.
LECTROKLEEN - D4 - FAST rapidly removes oil, grease, wax, dust, moisture, soil, etc. and has low toxicity, is not corrosive and evaporates leaving surfaces clean and dry.
High dielectric constant.( over 48.000 volts) Specific resistance : 109 ohm.
LECTROKLEEN - D4 - FAST is used neat, by brush spray or swab.
Allow LECTROKLEEN - D4 - FAST to completely evaporate leaving surface dry.
Appearance: Clear colorless liquid.
Flash point: Non-flammable Compatibility: Safe for all metals.
Liquid as the above. Works harder has a high flash point lower evaporation rate and is ideal for use in warm climates. Code : P00389 | | (SDS)
LECTROKLEEN - S is a highly effective cleaning compound especially formulated to replace 1,1,1 Trichloroethane in all cleaning operations where a balanced evaporation rate solvent is required.
Electric motors, electric equipment, panel boards, pumps, valves, machinery, starters, generators, connectors, fans and blowers, cables and wires, distributors, military aircraft, mechanical parts, motors, engines, etc.
LECTROKLEEN - S is a product with a balanced evaporation rate and lasts at least twice as long ordinary solvent cleaners. High MAC rating and low toxicity make it an outstanding cleaner. Good cleaning and degreasing properties. Removes oil, grease, wax, dust, moisture, soil, etc. High dielectric constant (over 30.000 Volts).
LECTROKLEEN - S is used neat and may be applied by brushing dipping or non- atomizing spray. Allow LECTROKLEEN - S to completely evaporate leaving surface dry.
Appearance : colorless liquid Specific gravity : 0,92 ± 0,02 Flash point : > 60°C
Corrosive action : none
pH : neutral
When a fast evaporating product is required use our product
LECTROKLEEN - D4 - FAST.
LECTRO CONTACT CLEANER 2003
Quick evaporating cleaner. Suitable for electronic components, circuit boards, VIDEO, TV etc. Code : P00175 | | (SDS)
2003 is a completely new technology, liquid compound, especially formulated for use in all cleaning operations where a very fast evaporating product is required.
Safe to all metals and plastic parts
High cleaning ability
Evaporates very quickly and completely, leaving no residues
Has a low halogen and sulfur content, is free from alkali metals and does not contain chlorinated solvents
2003 is used for removing oil, grease, dust, light carbon and other filth from engines, spare parts, machinery, equipment, electric apparatus, generators, cables, switches, relays, video tuners, potentiometers, transistors and electronic equipment. It does not attack plastic, insulating materials, cables and has high cleaning ability.
It is used undiluted and may be applied by brush, dipping or non-atomizing spray. Allow 2003 to completely evaporate leaving surface dry.
2003 is specially developed to replace (MIL-C-81302) 1,1,2-Trichloro 1,2,2 – Trifluoroethane which is characterized as causing depletion of the ozone layer according to the Montreal Protocol and has been forbidden.
2003 according to the above specification is used for cleaning space vehicle components, precision assemblies, oxygen systems and electronic equipment by the processes of spraying and flushing.
2003 is a very fast evaporating product, leaves no residue and has a high
dielectric constant (over 25,000 volts).
LECTRO CONTACT CLEANER 203
Slow evaporating cleaner. Suitable for electronic components, circuit boards, VIDEO, TV etc. Code : S08200 | | (SDS)
203 – ELECTRONIC CONTACT & ELECTRONIC SYSTEMS CLEANER is a NEW TECHNOLOGY, fast evaporating, contact cleaner for all types of electrical and electronic equipment. Leaves no residues and has a high dielectric constant.
Effectively removes oil, grease, dust, moisture, etc.
Safe to all types of plastic and rubber.
Ozone friendly - CFC free
Does not contain chlorinated hydrocarbons
Ideal for electrical/electronic parts
Safe on plastics
Formulated to replace the product of specification MIL-C- 81302 which usage has been forbidden since it destroys the ozone layer.
203 – ELECTRONIC CONTACT & ELECTRONIC SYSTEMS CLEANER can be used for industrial, office, military, aviation and marine equipment for cleaning all electric and electronic parts and as a general use cleaner, such as: