Oil spill dispersant water based. Non toxic, liquid product.
Code : P00252 | | (SDS)
DISPERSER-B is a hydrocarbon free, biodegradable, water based product for the control of floating oil, either on fresh or salt water, especially around refineries, bulk terminals and marine loading terminals.
DISPERSER-B is a non-toxic, liquid product containing surfactants and a special dispersing agent.
Although primarily used to disperse oil floating on the water, the product may also be used for oil spills on ship decks, concrete pads, floors or bulkheads.
- Eliminates pollution of rivers and streams.
- Eliminates fire hazard around docks and piers.
- Eliminates nuisance and contamination problems.
- Reduces hazard of spillage where aquatic life is concerned.
- Reduces clean-up time after accidental spillage.
- Reduces contamination due to faulty oil-water separators.
DISPERSER-B is concentrated and used neat or diluted in a proportion of 1 part DISPERSER-B in 10 parts of seawater. Then spray the disperser over the oil in a heavy droplet spray.
Allow to stand for a few minutes, then agitate with high-pressure hose, working the stream back and forth in the oil slick. In some cases the propellers of a launch or boat will be sufficient agitation to break up the slick.
Normally the expected dosage of disperser to fuel oil is one gallon of disperser to 8 or 10 gallons of fuel oil.
DISPERSER-B meets the requirements of the LR 448 specification as a Type II dispersant and is approved by:
a) WARREN SPRING LABORATORY (ENGLAND).
b) NATIONAL CENTER FOR MARINE RESEARCH (GREECE).