Description

HADISON-E is a perfumed paste with lanolin containing natural ingredients and thin plastic grains, specially formulated for hand cleaning from difficult soils such as oil, grease, light carbon, light paint etc.

Directions for  Use 

Apply a small amount in your hands and rub briskly.

When the soil is loosened simply rinse with water and/or take a dry cloth or paper towel and wipe hands clean.      

Applications

The removal of industrial grime, oil and grease from the hands and other parts of the body.

Features & Benefits

• Effective and suitable for the most severe soiling. Due to its mildness can be used safely day after day.
• Works effectively in hot, cold, hard or soft waters.
• Pleasant perfume.
• Antiseptic properties
• Protects : Contains lanolin and emollient to promote good skin condition.
• Contains natural ingredients and thin sand grains, which act like a light scrubbing brush to aid the cleaning action.

Approvals

HADISON-E is approved according to the Greek legislation by the State General Chemical Laboratory as a hand cleaner with registration no. 542/86.

Description

SARMOL 6040 is a viscous liquid product for hand cleaning which is extensively used in household and professional  use.

SARMOL 6040 contains lanolin and  does not irritate skin.

With the special additives that SARMOL 6040 contains it can be used with hard and soft water.

SARMOL 6040 has a pleasant, rose scent that stays on skin after washing.

Usage

SARMOL 6040 is for household and professional use.

Application

Dispense a small amount onto hands, rub lightly and rinse with plenty of water.

Technical Characteristics

pH:                            6,5 – 7,5        

Appearance:                Viscous  pink liquid

Specific density:         1gr. / cm³ 

Approvals

SARMOL 6040 is approved according to the Greek Legislation by the General State Chemical Laboratory with Approval No. 155/0/92

Description

PR-5054 is a low odor, thickened paint stripper.

Appliction

PR-5054 is especially designed for removing epoxy and polyurethane paints as well as other difficult to remove organic coatings including sealants and adhesives from metal surfaces. It is safe for all kind of metals.

Advantages

• Safe to all metals. Phenol and chromate free.
• Low odor. Ideal for closed areas.
• Non-flammable.
• Easily rinsed with cold water.
• Can be applied by brush or non-atomizing spray methods.
• Used as received. No mixing or dilution required.
• Used at room temperature.

Usage

PR-5054 can be applied as received by brush or spray. Because it is thick it is ideal for vertical surfaces.

Allow PR-5054 sufficient dwell time for thorough loosening or blistering of the paint. When paint is loose, thoroughly agitate all areas with a stiff bristle brush. The complete removal of the paint residues is accomplished with high pressure, high volume, cold water or with a steam cleaning machine.

Normally a coat of PR-5054 is sufficient to remove more than one coating of paint.

Where multicoat systems have to be removed, it may be necessary to use more than one application of PR-5054

Description

AQUA CHECK is a pink paste which in contact with water changes color, show ng the presence of water in gas oil tanks.

AQUA CHECK meets the requirements of MIL-W-83779.

Application

Place a thin film of AQUA CHECK paste on a clean gauge line rod, approximately where water level is expected to appear. Dip rod into tank until bottom is reached.

The pink color of AQUA CHECK changes to red in contact with water level.

The change of color is instantaneous in gasoline or kerosene and a few seconds longer for dark oils.

Technical properties

Melting point : > 50 oC

Time of changing color : 30 seconds max. Appearance : Homogeneous paste.

Stability : Undeteriorated for one year maximum.

Description

BUBBLE FLUID is a slightly viscous liquid leak detector which is designed to provide a fast, sure and easy means of detecting leaks or pin holes in welded fuel tanks and pressure tanks or vessels of every description.

BUBBLE FLUID mixes immediately and completely in all proportions in distilled or tap water. It is free rinsing, leaving no residues to interfere with subsequent paint adhesion and prevents corrosion since it contains corrosion inhibitors.

The application of BUBBLE FLUID to water results in a solution in which the surface tension is amazingly low. Consequently, very small bubbles appear on the surface when air is introduced into the solution.

Use Instructions

Tank immersion : 100 ml BUBBLE FLUID / 125 liters of water.

The container to be tested is submerged in the testing tank and simultaneously air under regulated low pressure is compressed in the tank being tested. If the leak is present, tiny bubbles rise to the surface, forming an isolated bubble cluster readily observable.

Brush-on method : 100 ml BUBBLE FLUID / 3 liters of water.

For brush use, agitate solution violently to obtain suds. Apply the suds to the par being tested. Upon the application of air pressure inside of the vessel leaks are shown by the disruption and bubbling of the suds film.

The BUBBLE FLUID solution can be water rinsed or wiped from the surface with water- wet cloths.

BUBBLE FLUID is also available in spray cans of 450 ml. The product in spray is used as it is.

Description

DRAIN CLEANER is a powerful drain opener that unclogs the sewage (sinks, tubs, W.C., baths, sewers, drains, etc.).

Provides fast, potent performance to clear blockages. No mechanical equipment is needed.

Dissolves all fat and all organic matter. Rapidly disintegrates hair, paper, food scraps, rags, sanitary napkins and impurities.

Contains anticorrosive additives and does not affect metals such as copper, bronze and lead.

Application

Wear gloves and carefully open the bottle. 

For unblocking:

If there is water, empty out as much as possible and add 200-250 ml (1/4 of this container) to the blocked facilities. Allow the product to act for 1 hour and then rinse with plenty of water.

For blocked W.C.:

Insert a flexible pipe of 1-meter length, in order to surpass the drain and add the product into the pipe with a trumpet.

For grease collectors and drains:

Use 500 ml (1/2 bottle). 

For pipes of large diameter:

Use 1000 ml (the whole bottle).

Maintenance

100 ml at regular time intervals.

Description

RUST-CONVERTER is a thin, liquid metal treatment compound which, when applied to rusted metal, chemically changes the rust (iron oxide) into iron phosphate.

Therefore moisture and oxygen do not attack the metal. The surface produced is an inert, hard and grayish surface which will serve as a firm base for paint.

RUST-CONVERTER is a metal primer not a paint. One gallon of the product covers approximately 600 square feet.

No mixing is necessary because RUST-CONVERTER is furnished in the proper strength for use.

RUST-CONVERTER can also be used on new ferrous metal, aluminum and galvanized iron.  It produces a toothed, slightly porous surface to which paint will grip and cling, forming a tight, lasting bond.

Usage

• On Rusted Surfaces: Remove loose rust or scale. Apply by brush, dip, spray or swab and let it dry overnight then paint. A powdery grayish surface usually develops, indicating that it has reacted with the metal. Now moisture cannot penetrate to metal. Brush off any loose powder, apply primer and then finish coat.

• On New Metals: Pre-clean by removing excess oil or grease with mineral solvent or with our product, LECTROKLEEN. Apply RUST- CONVERTER by brush, dip, spray or swab. Let it dry overnight, brush off any loose powder and the surface is ready for painting.

Applicable Use

RUST-CONVERTER converts rust on anything made of ferrous metals. Use it on vehicle parts, railroad cars, stockpiled castings, downspouts, stacks, tanks, building, fences, steel windows, girders, roofs, plates, pipe fittings, etc.

Description

Contact us for further technical information concerning this product

Eurochem Customer Support Team

Τel +30 210 4836321

Этот адрес электронной почты защищён от спам-ботов. У вас должен быть включен JavaScript для просмотра.

Description

Emulsifiable oil machining lubricant which contains lubricant additives, rust inhibitors, emulsion stabilizer and bacteriostats to assure effective cutting tool lubrication and prolonged service life.

Purpose

Lubricool No 12 is an Emulsifiable Oil base coolant used for machining and cutting operations. When mixed with water it forms a milky oil in water emulsion that provides effective lubrication and rust protection.

Advantages

Lubricool No 12 provides the following product features:

• Oil base assures optimum lubrication
• Water dilution provides maximum cooling efficiency
• Inhibited to provide effective rust protection
• Long in service life maintained by effective bacteriostats
• Non-odorous due to careful selecting of petroleum derivatives
• Biodegradable to permit safe and inexpensive disposal

Application

Concentrations of Lubricool No 12 will vary depending on the hardness of the metal, severity of the cut, machine speed and type of cutting tool. A general guide for use of Lubricool No 12 is: