Другое - eurochemgr.com

SARMOL 6040

Густое, жидкое средство для мытья рук, широко использующееся в домашних и профессиональных целях. Содержит ланолин и не раздражает кожу. Можно использовать с жесткой и мягкой водой. Обладает приятным розовым ароматом.

Код : 120100 | | (SDS)

Description

SARMOL 6040 is a viscous liquid product for hand clean ng which is extensively used in househ ld and professional use.

SARMOL 6040 contains lanolin and does not irritate skin.

With the special additives that SARMOL 6040 contains it can be used with hard and soft water.

SARMOL 6040 has a pleasant, rose scent that stays on skin after washing.

Usage

SARMOL 6040 is for household and professional use.

Application

Dispense a small amount onto hands, rub lightly and rinse with plenty of water.

Technical Characteristics

pH: 6,5 – 7,5

Appearance: Viscous pink liquid Specific density: 1gr. / cm3

Approvals

SARMOL 6040 is approved according to the Greek Legislation by the General State Chemical Laboratory with Approval No. 155/0/92

KEM – TC

Средство в виде порошка. Предотвращает засорение кухонных и ванных раковин, сливов жиром, маслом и т. п.

Код : K3016 | | (SDS)

Description

BIOCIDE

Очень эффективное жидкое средство, предотвращающее рост морских культур, таких как: моллюски, водоросли, бактерии, растения и микроорганизмы, в системах, использующих морскую воду. Благодаря созданию защитной плёнки на поверхности, предотвращает коррозию металла. Для статических и проточных типов систем, использующих морскую воду.

Код : P00178 | | (SDS)

Description

BIOCIDE is a very effective, dispersant, of marine growths such as shellfish, algae, bacteria, plant life and micro-organisms used for the prevention of fouling in sea water systems. BIOSIDE may also act as a corrosion inhibitor due to its filming properties.

Benefits

BIOCIDE is an easy to use liquid treatment which is extremely effective in the control of sea water fouling organisms. It is a product that has multiple uses. Keeps heat steady and extends the period in between cleaning. Cuts down on maintenance and reduces down time. It is economic, biodegradable and suitable for all types of systems which use seawater both static and flowing. This product is not suitable for drinking water.

DIrections

BIOCIDE was specially designed for the prevention of seawater cooling system from becoming fouled by aquatic organisms like barnacles, algae etc. This product prevents bacteria from colonising metal surfaces due to the dispersant contained in the product making it unsuitable for the settling of bacteria and therefore unfavorable for larger fouling organisms. Anti corrosion properties are also provided by its filming characteristics. BIOSIDE can also be used in both flowing and static systems. Some examples for application are: sea water systems, which includes filter boxes, seawater systems etc.

Dosage

When using a chemical dosing pump with or without alarm should be used. Treatment should be started with a clean system although the product will gradually clean fouled systems too. It can be used as is or if necessary diluted with fresh water to accommodate the dosing equipment. When switching over from any other product to BIOCIDE, the entire system should be thoroughly rinsed with fresh water.

For Sea Water Cooling Systems

For every 100 tons of sea water flowing through the system per hour 0.6 liters of BIOCIDE should be added. From the rating of the pumps or from the system specifications the system throughput should be determined. In coastal waters treatment is necessary and should commence three days before the entering of these waters and should continue three days after exiting coastal waters. The calculated dosage should be applied over an hourly period and every 48 hours should be repeated.

For Static Ballast Tanks

Dosage is as follows for every 10 tons of water prior to ballasting, dose 1 liter of BIOCIDE and then follow with a monthly dosage of 2 liters per 100 tons.

For Trim Tanks, Oil Rig Sea Legs and Similar Systems dosing should be as follows: For every 100 tons of water dose 25 liters of BIOCIDE and the same should be applied for make up water.

NOTE: If necessary BIOCIDE should be diluted with fresh water only prior to application.

PROTECTIVE OIL

Маслянистая жидкость, содержащая ингибиторы ржавчины, образующая тонкий слой на поверхности, защищающая его от влаги и коррозии. Для защиты электродвигателей, подвесных двигателей, реле и т. п.

Код : P00488 | | (SDS)

Description

PROTECTIVE OIL is a oily - liquid containing rust inhibitors which forms a thin layer on the surfaces protecting them against humidity and corrosion.

Application

PROTECTIVE OIL is originally formulated for protecting metal surfaces from subsequent corrosion, isolating humidity.

Alternative Uses

PROTECTIVE OIL could be also used for electric motors, outboard engines, distributors spark plugs, relays etc.

Didections of Use

PROTECTIVE OIL is used in full strength by spray immersion or swab.

Let PROTECTIVE OIL to dry to form a protective anti-corrosive film.

WATER DISPLACER

Быстродействующая, влаговытесняющая жидкость, создающая ультратонкую защитную плёнку на поверхности, предохраняющую от ржавчины и коррозии. Останавливает утечку и искрение. Проникает, смазывает и освобождает ржавые соединения.

Код : S07900 | | (SDS)

Description

A fast acting water and moisture displacer fluid that quickly cleans and dries out machines, electrical and electronic equipment.

It is rust preventive (ultra thin film) and protects the surfaces from rust and corrosion.

It allows quick starting of wet ignition systems and electric motors and equipment without disassembly or removal.

It eliminates moisture from the electrical systems of various machines.

Penetrates existing rust and forms a film to prevent further corrosion.

Cleans and lubricates the surfaces it is applied.

Applications

Aviation equipment.
Wet ignition systems on cars, trucks, ships, etc.
Wet electric motors and starters in power plants, factories, shipboard, etc.
Cutting tools, hand tools, micrometers and measurement instruments.
Seagoing equipment and Outboard engines.
Pumps and valves.
Cleaning compound for bore of small arms and automatic aircraft weapons.

This product also meets the requirements of U.S. military specification MIL-C-81309 for water displacement and corrosion.

Usage

It can be applied with spraying or brush. Do not wipe off the surface. As the product evaporates it leaves a protective soft film on the surface with the above advantages.

IS – 2006 HARD

Защита от ржавчины. Долговечное защитное покрытие для запасных частей, подвесных двигателей, тросов, металлических поверхностей и т. п., образующее, после испарения растворителя, на поверхности твёрдую плёнку. Твёрдая плёнка лучше противостоит коррозии и ржавчине по сравнению с другими средствами, образующими мягкую плёнку.

Код : 100830 | | (SDS)

Description

IS 2006 belongs to the category of anticorrosive products and its aim is to protect the surfaces on which it is applied, from rust and corrosion. When we use IS 2006 the containing solvent which evaporates leaves on the surface a thick layer which protects the surface from corrosion and rust.

Benefits

IS 2006 is suitable for:

The protection of metal surfaces, outboard engines, spare parts etc.
Electric motors, generators, distributors, spark plug, relays etc.

IS 2006 meets the requirements of the American specification MIL – PRF – 16173 E Grade 4 (transparent, non tacky film) (Corrosion Preventive Compounds).

This type of Hard Film gives better results against corrosion in relation with other products, which form a soft film.

Usage

IS – 2006 is used by immersion, brush or spray. After its application do not wipe the surface. As the solvent evaporates, it forms a thick layer with the above- mentioned properties.