Обработка испарителей

KEM – ET

Ингибитор отложений для испарителей и многоступенчатых испарителей высокого и низкого давления, на основе смеси полимеров и пеногасителей. Увеличивает производство воды и скорость теплопередачи, позволяя большему количеству нагреваемой поверхности вступать в контакт с водой. Улучшает качество воды.

Код : P00359 | | (SDS)

Description

KEM-ET is a blend of polymers and defoamin r scale and foaming control in high and low pressure evaporators.

Specification

Appearance : pale yellow liquid Specific Gravity : 1,10 + 0,05

Flash point : none

Advantages

Increases the production of the water.
Improves the quality of the water.
The defoaming action of the product increases heat transfer rates by allowing more heating surface to come into contact with the water.

Application

KEM-ET is normally added to the evaporator at the rate of 1-2 ounces per ton of distillate produced.

Brine density should not exceed 1,5/32.

At higher brine densities solid formation creates soft deposits on the evaporative surfaces.

KEM-ET will clean up moderate amounts of deposits. In this case double the dosage rates.

AF – II

Сильный жидкий пеногаситель для испарителей и многоступенчатых испарителей, состоящий из полиэфирных соединений и специальных противовспенивающих добавок. Для нейтрализации пены в: целлюлозно-бумажной промышленности, пищевой промышленности, текстильной промышленности, лакокрасочной промышленности и в других отраслях, где возникают проблемы с пенообразованием. Не токсичен.

Код : P00104 | | (SDS)

Description

AF - II is a strong general purpose antifoam which consists of polyester compounds and special anti - foaming additives whose combined action creates a very effective product with the following advantages:

a). It is neutral and dissolves completely in water.

b). It is non-toxic.

c). pH does not affect its efficiency.

d). It works at low temperatures as well as at high temperatures where silicone antifoam agents cannot work effectively.

e). It is mostly used in aqueous solutions.

Applications

AF - II is used to neutralize foam in:

Pulp and paper Industries	Polyethylene Industries	In liquid or solid detergents
Distilleries	PVC Industries	In caustic soda solutions
Food Industries	Sewage Industries	In Hydrochloric acid
Textile Industries	Paint Industries	Drillings
Plastics Industries	Organic cleanings	Cooling towers

and generally in industries where foaming problems appear.

Usage

AF - II is added to the solutions in a proportion of 0.01 - 0.3%. This proportion varies depending on the case.

Especially in distilleries, in caustic baths, a proportion of 0.01 - 0.05% is enough to eliminate the foam.

In liquid detergents, it is used in a proportion of 20-25% of the amount of the surfactants that exist in detergents.

Technical Characteristics

Appearance : White liquid.

Flash point : Non-flammable.

Approvals

AF-II is approved by:

- The Hellenic Navy.

- The Greek Sugar Industry.

- The Public Power Corporation SA-HELLAS

Also, the product is approved by the Benaki Foundation as non-toxic and suitable for use in Food Industries.