Description

KEM-KLEEN-37 is a water base concentrated liquid, heavy duty, water dilutable cleaner for use on aerospace equipment to include aircraft, aerospace ground equipment (AGE) and AGE engines.

Meets the requirements of the following specifications:

MIL-PRF-87937 D TYPE IV

AMS 1526C

BOEING Document D6-17487

Application

KEM-KLEEN-37 is designed especially for the removal of dirt, oil, light grease, light carbon and smoke stains from painted and unpainted aircraft surfaces.

KEM-KLEEN -37 is safe for all kind of metals and well bonded painted surfaces. Can be used also as a cleaner for all aircraft components. Does not destroy the anodized surfaces.

Usage

KEM-KLEEN-37 may be used neat or diluted with water in varying concentrations depending on the heaviness of the soil.

• For heavy duty cleaning: Dilute 1 part concentrate up to 5 parts of water.
• For normal cleaning: Dilute 1 part concentrate up to 10 parts of water.
• For light cleaning: Dilute 1 part concentrate up to 20 parts of water. The same dilution is also used for cleaning acrylic surfaces.

KEM-KLEEN-37 is applied by immersion, mop or spray. Allow to stand on surfaces for 5-10 minutes, then slightly move over the soiled areas with a mop and rinse off with high-pressure water.

Description

KLEENOL 2000 - PRO is an aromatic solvent based concentrated liquid, heavy duty, water dilutable cleaner which meets the requirements of BOEING Document D6-17487, MIL-PRF-85570D TYPE I, AMS 1526 and AMS 1527.

APPLICATION

KLEENOL 2000 - PRO is designed especially for removing dirt, oil, light grease, light carbon and smoke stains from painted and unpainted exterior aircraft surfaces.

KLEENOL 2000 - PRO is safe for all kind of metals and well bonded painted surfaces. Can be used also as a cleaner for all aircraft components. Does not destroy the anodized surfaces.

USAGE

KLEENOL 2000 - PRO may be used neat or diluted with water in varying concentrations depending on the heaviness of the soil.

• For heavy soils: Use neat or dilute 1 part concentrate up to 4 parts of water.
• For moderate soils: Dilute 1 part concentrate up to 9 parts of water.
• For light soils: Dilute 1 part concentrate up to 14 parts of water.

KLEENOL 2000 - PRO is applied by immersion, mopped or spraying. Allow to stand on surfaces for 5-10 minutes, then slightly move over the soiled areas with a mop and rinse off with high pressure water.

PRODUCT PROPERTIES

Appearance : Clear liquid. Flash point : > 60 ^oC

Ph : 8,5 + 1

Description

EC-201 is a concentrated liquid, heavy duty, water dilutable cleaner which meets the requirements of BOEING Document D6-17487 and MIL-C-43616C CLASS 1 and A-A-59921.

Application

EC-201 is designed especially for the removal of dirt, oil, light grease, light carbon and smoke stains from painted and unpainted exterior aircraft surfaces.

EC-201 is safe for all kind of metals and well bonded painted surfaces. Can be used also as a cleaner for all aircraft components. Does not destroy the anodized surfaces.

Usage

EC-201 may be used neat or diluted with water in varying concentrations depending on the heaviness of the soil.

• For heavy duty cleaning: Dilute 1 part concentrate up to 5 parts of water.
• For normal cleaning: Dilute 1 part concentrate up to 10 parts of water.
• For light cleaning: Dilute 1 part concentrate up to 20 parts of water. The same dilution is also used for cleaning acrylic surfaces.

EC-201 is applied by immersion, mop, spray or conventional foamers. Allow to stand on surfaces for 5-10 minutes, then slightly move over the soiled areas with a mop and rinse off with high-pressure water.

Approvals

MIL-C-43616C CLASS 1 (QPL product).

Description

KEM-KLEEN 68 is a pleasantly aromatized liquid, originally formulated to clean all interior and exterior aircraft surfaces.

Meets the requirements of AMS 1550 and BOEING DOCUMENT D6-7127.

KEM-KLEEN 68 is safe to all inner surfaces and seats of aircrafts.

Advantages

• Does not stain or streak aluminum.
• Suitable for interior and exterior surfaces and parts.
• Soluble in water in all proportions.
• Pleasant scent.
• Safe for metals and well bonded paints.
• Does not attack plastic and Plexiglas when used according to the instructions.

Uses

1. a) Interior cleaner: Is used for removing all customary soils as stains, oils,

nicotine, crayon etc. from inner surfaces and seats of aircrafts.

1. b) Exterior cleaner: For effectively cleaning painted and unpainted aircraft exterior. Removes dirt, grease, petroleum and synthetic oil films, light carbon, etc.

Method of use

• Interior application: Use diluted in water in a proportion ranging of 1 part of KEM-KLEEN 68 with 10-15 parts of water. Spray on or apply with a mop or clean cloth wet with the product. After a suitable wetting period, depending on degree and type of contamination, wipe off with a clean-dry cloth. Stubborn spots may require application of a more concentrated solution. Rinsing is not required but is desirable for most effective removal of loosened dirt film.
• Exterior application: Use diluted in water in a proportion ranging from 1 part up to 15 parts of water.

For heavy duty cleaning: Neat or diluted in a proportion of 1:5.

For light duty cleaning: Diluted with water in a proportion of 1:5 to 1:15.

Allow to stand for 5-10 minutes. Brush all areas with soft bristle brush and finally rinse with high pressure water.

Description

DEODORANT CONCENTRATED is a completely soluble, non flammable, non corrosive liquid toilet disinfectant / deodorizer.

DEODORANT CONCENTRATED is formaldehyde free and all the detergents are biodegradable. It contains chemical and aromatizing agents which do not just mask, but actually prevent the formation of odors.

At use concentrations, DEODORANT CONCENTRATED is non-corrosive to all metals and materials used in the toilet systems.

Because it is a liquid, DEODORANT CONCENTRATED it is easier in handling than powders or pellets. It also contains a deep-blue color indicator, which allows ease inspection of tanks for presence of deodorant.

DEODORANT CONCENTRATED solution lasts throughout the complete flight and does not require constant checking or "in-flight" replenishing.

Specifications

DEODORANT CONCENTRATED meets the following specifications:

Conforms to the requirements for non-corrosivity of metals and compatibility with nonmetallic materials of AMS 1476B.

BOEING DOCUMENT D6-17487

Technical information

Appearance: Dark blue liquid. Density: 1,00 + 0,01

Flash Point: Non-flammable.

Utilization

The recommended dilution for DEODORANT CONCENTRATED is 1 % in water of total capacity of the system reservoir. To maintain this concentration, reestablish the intensity of the blue coloration by adding small quantities of DEODORANT CONCENTRATED.

This proportion can be reduced or increased depending in the flight duration and the desired result.