Description

Heavy duty water based alkaline cleaner, containing specially selected sequestrants, powerful synthetic detergents, alkaline salts and soaps. Not suitable for aluminum, zinc, tin, zinc silicate coatings and painted surfaces.

In this case use our product ARR-SAFETY LIQUID.

Applications

ARR-LIQUID is efficient in cleaning heavy duty cargo tanks as well as refrigerated holds, containers and cargo holds, discharging them of drying, semi- drying and non-drying natural oils and fats. It is also used in removing a wide range of petrochemicals, alcohols, light hydrocarbons, carbon deposits, mineral oils, residual combustion products, grease etc.

*ARR-LIQUID is used in dairies for the removal of butter from pumps and piping with excellent results.

Directions for Use

• With immersion, spray or brush.

ARR-LIQUID is applied by immersion, spray or mop. May be used neat or diluted with water in a proportion of 5% depending on the amount of soils.

Allow the solution to remain on the surface for a few minutes and rinse with water under pressure.

ARR-LIQUID can be used cold or hot. For better results heat the solution up to 60 - 70oC.

• With recirculation and heating.

By using a secondary tank, heat a solution of 5-20% ARR-LIQUID at 80-90 0C with the heating coils and clean the surfaces, by using a pump and recirculate the material for 2 to 6 hours, then flush with water.

Features

ARR-LIQUID is non flammable and non-corrosive to ferrous metals.

Furthermore, it prevents redeposition in the cleaned areas.

Description

KLEENOL 2000 is an alkaline liquid cleaner containing powerful solvents, capable of removing many difficult impurities.

Application

KLEENOL-2000 is suitable for cleaning, gas and fuel burners, cargo tanks, painted surfaces, walls, floors, plastic surfaces etc.

Can be used also for general cleaning purposes.

Advantages

KLEENOL-2000 removes easily and efficiently vegetable and animal oil, fat, grease, carbon residue, etc.

Removes oxides from aluminum parts, cleaning stainless steels parts, etc.

KLEENOL-2000 is safe for aluminum, magnesium, cadmium plated steels, titanium and Plexiglas when used according the instructions.   

Usage

KLEENOL-2000 is applied by immersion, spray or mop. May be used neat or diluted with water in a proportion of 5% depending on the amount of soils.

Allow the solution to remain on the surface for a few minutes and rinse with water under pressure.

KLEENOL-2000 can be used cold or hot. For better results heat the solution up to 60-70⁰C.

Specific Application

1). Cleaning of white color

Dilute in water in a proportion of 1:3. Apply by spray or mop and allow to remain on the surface for 2-5 minutes.

2). Cleaning of other colors than white

Dilute in water in a proportion of 1:10 to 1:20.

Apply by mop or spray. Allow to remain on the surface for 3-5 minutes.

3). For the aluminum parts don't use KLEENOL-2000 neat but diluted in water in a proportion of 1:3. The contact time is about 1-3 minutes.

For all above- mentioned cases, follow by thoroughly brushing and rinsing with water under pressure.

NOTE: Keep in mind that KLEENOL-2000 is an alkaline product and may affect the paint and aluminum if it doesn’t used according to the use instructions.

Description

Non caustic water based alkaline cleaner, containing powerful solvents, corrosion inhibitors and biodegradable compounds.

Does not contain caustic substances is not flammable, economical and it is safe for all kind of metals including Aluminum, Zinc, Copper, Tin and painted surfaces.

ARR-SAFETY LIQUID minimizes the extreme hazards caused to the personnel during handling caustic based materials.

Applications

ARR- SAFETY LIQUID is efficient in cleaning heavy duty cargo tanks, discharging them from dry, semi-dry and non-drying natural oils and fats. It is used to remove a wide range of petrochemicals, alcohols and light hydrocarbons.

ARR-SAFETY LIQUID removes easily and efficiently vegetable and animal oils, fats, light carbon residues, mineral oils, grease etc. from painted and unpainted surfaces, walls, floors, plastic surfaces etc.

Directions for Use

           a) With immersion, spray or brush.

ARR-SAFETY LIQUID is applied by immersion, spray or mop. May be used neat or diluted with water in a proportion of 5% depending on the amount of soils.

Allow the solution to remain on the surface for a few minutes and rinse with water under pressure.

ARR-SAFETY LIQUID can be used cold or hot. For better results heat the solution up to 60 - 70^oC.

           b) With recirculation and heating.

By using a secondary tank, heat a solution of 5-20% ARR- SAFETY LIQUID at 80-90^oC with the heating coils and clean the surfaces, by using a pump and recirculate the material for 2 to 6 hours, then flush with water.

Features

ARR-SAFETY LIQUID is non-caustic, non flammable and non-corrosive to all metals. It is suitable for all tank-coatings. Furthermore, it prevents redeposition on the cleaned areas.

Description

EUROCLEAN is a multi-purpose, water based, cleaner with surfactants for fast effective cleaning. Does not contain chlorinated solvents.

EUROCLEAN is ideal for removing mineral oils and grease from air coolers, machinery parts, diesel engine exteriors, compressor exteriors, tank tops, bulkheads, decks, bunker tanks etc. Also it is suitable for engine room decks and spot cleaning/degreasing of oil tanks. Effectively removes jet exhaust carbon and hydraulic fluids from aircraft exterior surfaces. Loosens and breaks up deposits, leaving surfaces oil and grease free, has a strong emulsifying action and it is easy to use. EUROCLEAN can be used as an all purpose degreaser.  EUROCLEAN is a  multi-purpose cleaner that  can be used for any cleaning operation such as steam cleaning, emulsion cleaning, immersion cleaning, ultrasonic cleaning, wipe on cleaning etc. in MARINE, AVIATION, TRANSPORTATION & INDUSTRY.

Advantages

• Excellent solvency for grease and soil.
• Safe on all metals including high strength steel, cadmium plated steel, mild steel, magnesium, aluminum, titanium, acrylic plastics, paints etc.
• Safe on polyamide electrical insulation.
• Contains no phenolics or heavy metal salts.
• Surfactants biodegradable.
• Is approved according to the Greek Legislation by the State General Chemical Laboratory with Approval No.10621/0/2006.
• Suitable for Food Industries.

Usage

EUROCLEAN is used diluted with water in varying concentrations by soaking, spraying, brushing or mopping. The dilution depends on the heaviness of the soil from neat or diluted up to 50 parts of  water.

Allow time for EUROCLEAN to act and then rinse off with water under pressure.

• For heavy cleaning

Use one part EUROCLEAN with 1-3 parts of water.

• For Degreasing

Use one part EUROCLEAN with 4 – 8 parts of water.

• For steam cleaning

Use one part EUROCLEAN with 100 – 200 parts of water.

Dilution will vary as per severity of application.