Description

LECTROKLEEN - Q is a non - flammable quick drying solvent, containing chlorinated hydrocarbons.

Applications

LECTROKLEEN - Q is applied for cleaning and degreasing of electrical equipment such as motors, generators, mechanical equipment, switchgears, coils and machine parts without the need of rinsing.

Advantages

LECTROKLEEN - Q dissolves rapidly oil and grease, has low toxicity in comparison with tetrachloride or trichloroethylene, is not corrosive and evaporates leaving surfaces clean and dry.

Usage

LECTROKLEEN - Q is used neat, by brush spray or swab.

Allow LECTROKLEEN - Q to completely evaporate leaving surface dry.

Specifications

Appearance: Clear colorless liquid. Flash point : Non flammable Compatibility: Safe for all metals.

May swell rubber

Description

LECTROKLEEN - D4 - FAST is a non - flammable quick drying solvent, containing chlorinated hydrocarbons. LECTROKLEEN - D4 - FAST has been specifically formulated to replace 1,1,1 Trichloroethane for all cleaning operations even for VAPOR DEGREASING.

Applications

LECTROKLEEN - D4 - FAST is applied for cleaning and degreasing of electrical equipment such as motors, generators, switchgears, coils, etc. and as a general use cleaner for machine parts, equipment, motors, engines, etc. without the need for rinsing.

LECTROKLEEN - D4 - FAST is alternatively used for vapor degreasing with excellent results.

Advantages

LECTROKLEEN - D4 - FAST rapidly removes oil, grease, wax, dust, moisture, soil, etc. and has low toxicity, is not corrosive and evaporates leaving surfaces clean and dry.

High dielectric constant.( over 48.000 volts) Specific resistance : 109 ohm.

Use

LECTROKLEEN - D4 - FAST is used neat, by brush spray or swab.

Allow LECTROKLEEN - D4 - FAST to completely evaporate leaving surface dry.

Specifications

Appearance: Clear colorless liquid.

Flash point: Non-flammable Compatibility: Safe for all metals.

Description

LECTROKLEEN - S is a highly effective cleaning compound especially formulated to replace 1,1,1 Trichloroethane in all cleaning operations where a balanced evaporation rate solvent is required.

Application

Electric motors, electric equipment, panel boards, pumps, valves, machinery, starters, generators, connectors, fans and blowers, cables and wires, distributors, military aircraft, mechanical parts, motors, engines, etc.

Advantages

LECTROKLEEN - S is a product with a balanced evaporation rate and lasts at least twice as long ordinary solvent cleaners. High MAC rating and low toxicity make it an outstanding cleaner. Good cleaning and degreasing properties. Removes oil, grease, wax, dust, moisture, soil, etc. High dielectric constant (over 30.000 Volts).

Usage

LECTROKLEEN - S is used neat and may be applied by brushing dipping or non- atomizing spray. Allow LECTROKLEEN - S to completely evaporate leaving surface dry.

Specification

Appearance : colorless liquid Specific gravity : 0,92 ± 0,02 Flash point : > 60°C

Corrosive action : none

pH : neutral

Note

When a fast evaporating product is required use our product LECTROKLEEN - D4 - FAST.

Description

LECTROKLEEN – ODORLESS is a non-chlorinated solvent with a slow evaporation rate for cleaning and degreasing electrical equipment.

Advantages

• Does not contain chlorinated solvents.
• Ozone friendly.
• Almost odorless.
• Rapid penetration and action.
• Efficient cleaning with no grease film or moisture residue.
• Harmless to electrical installation.
• High dielectric constant.
• Non-corrosive can be used on all normal components with no risk of corrosive damage.
• Flash point > 60^o C.
• Does not require rinsing.
• Restores resistivity to the insulation.

Application

LECTROKLEEN – ODORLESS is applied for cleaning and degreasing of electrical equipment such as motors, generators, cables, switchgears, distributors, etc. and as a general use cleaner for machine and spare parts, equipment, motors, engines, coils, etc. without the need for rinsing.

It is used undiluted and may be applied by brush, dipping or non-atomizing spray.

The objects are allowed to dry. No rinsing required.

Approvals

LECTROKLEEN – ODORLESS meets BOEING specification D6–17487 and is approved by:

• The Greek Armed Forces.
• The Greek Public Power Corporation.
• The Greek Chemical State Laboratory with approval No. 12039/0/2007.

Note

Is a product with slow evaporation rate and lasts at least twice as long ordinary solvent cleaners.

Ideal for warm climates.

When a fast evaporating product is required use our product LECTROKLEEN - D4 - FAST.

Description

LECTROKLEEN FAST ODORLESS is a non-chlorinated solvent intended for use where a low odor solvent with fast drying characteristics is desired for cleaning and degreasing electrical equipment and for general use.

Advantages

• Does not contain chlorinated solvents.
• Ozone friendly.
• Almost odorless.
• Rapid penetration and action.
• Efficient cleaning with no grease film or moisture residue.
• Harmless to electrical installation.
• High dielectric constant.
• Non-corrosive can be used on all normal components with no risk of corrosive damage.
• Does not require rinsing.
• Restores resistivity to the insulation.

Application

LECTROKLEEN FAST ODORLESS is applied for cleaning and degreasing of electrical equipment such as motors, generators, cables, switchgears, distributors, etc. and as a general use cleaner for machine and spare parts, equipment, motors, engines, coils, etc. without the need for rinsing.

It is used undiluted and may be applied by brush, dipping or non-atomizing spray.

The objects are allowed to dry. No rinsing required.

Approvals

LECTROKLEEN FAST ODORLESS meets BOEING specification D6– 17487 and is approved by:

• The Greek Armed Forces.
• The Greek Public Power Corporation.