Description
PROTECTIVE OIL No 4 is a corrosion preventive compound specially designed to protect metals against rust and corrosion for indoor storage, semi-sheltered outdoor storage and shipment. When used as recommended PROTECTIVE OIL No 4 is easy and economical to apply and remove and provides a durable, long lasting, soft coating suitable for protecting metal surfaces against the elements of corrosive environment.
Advantages
- Forms a corrosion resistant and salt water resistant protective film.
- Stops grinding by penetrating deep and lubricating, hinges, locks, mechanisms, threads, etc.
- After its application surfaces remain lubricated.
- Meets corrosion requirements of U.S. Military Specification MIL-C-16173E Type II soft film.
Product Characteristics
Flash point: >200°C
Pour point: <-5°C
Viscosity (40°C): >25° cSt Specific gravity: 0.9 ± 0.01 gr/cm³
Intended Usage
- For extended indoor protection of interior or exterior surfaces of machinery, instruments, bearings or materials with or without use of supplementary barrier materials.
- For outdoor protection of material for limited periods where metal temperatures do not reach levels that produce prohibitive flow of the corrosion preventive film.
Alternative Usag
PROTECTIVE OIL No 4 can also be used for electric motors, outboard engines, distributors, spark plugs, relays, etc.
Directions for Use
PROTECTIVE OIL No 4 is used in full strength by spray, immersion or swab. Allow
PROTECTIVE OIL No 4 to dry to form a protective anti-corrosive film.
Product Removal
PROTECTIVE OIL No 4 is easily removed from parts by solvent wiping, steam gun cleaning or alkaline hot tank immersion.