SOLVENT 680 Type II. Растворитель 680 тип II. Для сухой чистки и обезжиривания.
Код : 100305 | | (SDS)
Description
All the products under specification MIL-PRF-680 are used as degreasers and cleaners for painted and unpainted metal surface and degreasing of machine parts in equipment maintenance.
TYPE II (low odor with high flash point solvent) is intended for use where a solvent with a higher flash point is desired. It is recommended over Type I for safety and regulatory reasons.
Advantages: MIL-PRF-680 Type II has replaced PD-680 Type II and has the following advantages:
- Safe to personnel contains less than 1% aromatics in comparison to PD- 680 Type II that contains approximately 20%.
- Almost odorless.
- Much safer to metals in comparison to PD-680 Type II.
- More efficient.
- Since it does not contain aromatics it is much safer to the environment.
- Is enlisted on the Qualified Product List (QPL) in accordance with specification MIL-PRF-680 TYPE II.
Product properties:
Flash point oC, min |
61 |
Distillation range oC |
185-211 |
Kauri-butanol value |
30 |
Copper Corrosion, max |
1b |
Sandwich Corrosion, max |
1 |
Acidity |
Neutral |
Doctor Test |
Negative |
Aromatic content, by volume %, max |
0,01 |
Specific Gravity |
0,78 ± 0,01 |
Color |
30 |
Odor |
Low and non-residual |
Soil Cleaning efficiency, min |
85% |
Usage: Used neat by brush, spray or dipping. Do not rinse off allow to dry.
Safety: Avoid contact with skin and eyes. For further instructions refer to MSDS.
Packaging: SOLVENT– 680 TYPE II is offered in 20 or 25 liter pails and 210 liter drums.
Note: Our company manufactures all 5 types of MIL-PRF-680, Type I, Type II, Type d Type V in conformance with the specification MIL-PRF-680.