Liquid product as the above but stronger.
Code : K3004 | | (SDS)
Description
KEM-031 is an acidic, liquid product used for continuous, shutdown or batch cleaning of felt or wire. KEM-031 can also be used for cleaning cylinder face wires and screens and it is particularly effective against asphalt, tar and pitch which are commonly found in secondary stock mills.
Advantages
- Provides a wide range of detergency due to the combined activity of acids, solvents and detergents.
- Effective against acid soluble and solvent soluble oils.
- The need for separate products is eliminated.
- Excellent for removing soils found in secondary stock mills.
Directions
Continuous Felt or Wire Cleaning: Apply KEM-031 through a low volume shower or conditioning equipment and inject 100-400 ppm through a proportioning pump.
Shutdown or Batch Felt or Wire Cleaning: The used concentration depends on the soil condition, use a 1-10% solution of KEM-031 in water. Apply by brush or spray. Elevated temperatures (e.g. 130-140ºF may be used, unless otherwise specified by the felt manufacturer. Follow with a warm rinse.
Cylinder Molds, Screens: Use a 5-10% solution of KEM-031 in water, recommended at a temperature of 140-160ºF. After necessary exposure time rinse thoroughly with warm water.